8 port 10gb sfp+ switch/8-port 10G SFP+ Aggregation Switch
Overview
Enhance the speed, capacity, and availability of your network with the Hotcom 8-Port 10G SFP+ Managed Aggregation Switch from H&T.
This compact managed Layer 2/L2+ switch-HT3208XG/HT3308XG offers eight 10G SFP+ ports and supports high-bandwidth links, making it ideal for aggregation switching to any device that deploys various interconnect topologies.
The Aggregation Switch HT3208XG/HT3308XG has a 160 Gb/s switching capacity with a 95.23 Mpps forwarding rate, features steel construction with a fan design, and can be rack mounted using the included kit.
Use the management Network Controller platform to configure, manage, and monitor your network devices.
The HT3208XG/HT3308XG 10Gigabit Fiber Convergence Switches are capable of meeting the networking requirements of large data center networks and are equipped with rich intelligence and security features, making them particularly suitable for use as server access devices in data center hyper-convergence scenarios.
8 port 10gb sfp+ switch Technical specifications
Interface |
||
Fiber Port |
8*10G SFP+ Slot |
|
Management Port |
1*RJ45 Console port |
|
Power connector |
3P Phoenix terminal |
|
LED Indicator |
PWR (green);System indicator:SYS(green);Network port indicator:yellow(1000 or POE) Green (Link) |
|
Cable type and distance |
||
Twisted pair cable |
0-70m (CAT5e, CAT6) |
|
Single-mode fiber |
20/40/60/80/100KM |
|
Multimode fiber |
300M |
|
Optical fiber interface |
SFP slot, LC connector |
|
Network topology & scale |
||
Ring topology |
Support |
|
Star topology |
Support |
|
Bus topology |
Support |
|
Tree topology |
Support |
|
Hybrid topology |
Support |
|
Electrical characteristics |
||
Input voltage |
DC12-52VDC |
|
Power consumption |
Full load (Total power) <10W |
|
L2 Features |
||
Standards |
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3an
IEEE 802.3bz |
|
Exchange capacity |
160G |
|
Packet forwarding rate |
95.23Mpps |
|
MAC address table |
16K |
|
VLAN support and quantity |
Support 4K |
|
Report buffer |
12M |
|
Forwarding delay |
<10us |
|
Port characteristics |
Cross-connect and direct-adaptive |
|
Flow control |
Support |
|
Jumbo frame support |
Support 10Kbytes |
|
Spanning Tree Protocol |
Support STP/RSTP/MSTP |
|
Ring network protocol |
Support ERPS |
|
Link aggregation |
Support 12 groups |
|
Multicast |
Support IGMP Snooping |
|
Port mirroring |
Support |
|
Storm suppression |
Support |
|
Port traffic statistics |
Support |
|
Port flow system |
Support |
|
QINQ |
Support |
|
Convergence Service |
||
ACL |
Support 500 ACLs;Support IP standard ACL;Support MAC extended ACL;Support IP extended ACL; |
|
QoS |
Support QoS re-marking and priority mapping;Support SP, WRR queue scheduling;Support entry speed limit and exit speed limit;Support flow-based QoS |
|
Management function |
||
Command line |
Support |
|
Management serial port |
Support |
|
Telnet |
Support |
|
WEB management |
Support |
|
SNMP |
Support SNMPv1/v2c |
|
User management |
Support |
|
System log |
Support |
|
File upgrade |
Support |
|
Firmware upgrade |
Support |
|
SFP module DDM |
Support |
|
Environmental conditions |
||
Working temperature |
0℃~+55℃ |
|
Storage/transport temperature |
-40℃~+85℃ |
|
Relative humidity |
5%~95% does not support condensation (non-condensing) |
|
Cooling method |
with fan cooling design |
|
MTBF |
100,000 hours |
|
Mechanical structure |
|
|
Size |
210X110X43mm |
|
Installation method |
Desktop |
|
Weight |
0.8KG |
Note:
Compatible with TL-SX3008F
应用拓扑图: