HT102L series is a fiber media converter specially designed for LED display control, which is developed to solve the problem of long-distance transmission of LED display. This special optical transceiver for large LED screen is seamlessly compatible with Linsn, Nova, Kystar, Bstar, TX, Colorlight, Lytec, Listen, Mooncell, Onbon, EQ, ZDEC and other major brands of LED control cards. HT102LLED optical transceiver uses a new imported high-performance network switching IC chip with stable performance.
The HT102L LED display media converter adopts a thick metal shell, which is beautiful and durable. The product has network ports and power supply lightning protection design. Moreover, the trouble-free working time of the product reaches more than 100000 hours. It is an ideal choice for long-distance transmission of indoor/outdoor LED display.
|
Parameter
|
|
|
Access
|
Gigabit ethernet
|
|
Standard
|
IEEE802.3z/AB，1000Base-T和1000Base-SX/LX
|
|
MAC address
|
4K
|
|
cache
|
256KB
|
|
Bandwidth
|
3.2G，Non-blocking Line Speed Forwarding
|
|
Interface
|
Copper：RJ-45，1000Mbps；Fiber：SC，1000Mbps
|
|
Wavelength
|
850nm/1310nm/1550nm
|
|
Distance
|
MMF：220M/550M
SMF：20/40/60/80/100/120KM
|
|
Flow control
|
Full duplex IEEE802.3x flow control ；Half duplex back pressure flow control
|
|
LED
|
PWR ,100m, 1000m, TP/Fx Link/Act.,PWR
|
|
Media
|
RJ45：Cat5e or Cat6 UTP cable；
Fiber: MM-SC（50,62.5/125μm）
Fiber: SM Dual fiber-SC(9/125μm）
Fiber: SM Single fiber-SC(9/125μm）
|
|
Transfer
|
Media converter
|
|
Time delay
|
<10us
|
|
BER
|
<1/800000000
|
|
MTBF
|
100000HOURS
|
|
Power supply
|
AC 100~240VAC，50Hz； DC: 5V 1A
|
|
Power consumption
|
5W
|
|
Operation temperature
|
-35~75℃
|
|
Operature humidity
|
5%~90%
|
|
Storage temperature
|
-40~70℃
|
|
Storage hunmidity
|
5%~90% non-condensing
|
|
Dimension
|
30mm(H)*110mm(W)*140mm(D) Built-in power
26mm(H)*71mm(W)*94mm(D) External power
|
Information provided in this document pertain to Hotcom products and is subject to change at any time, without notice.
远距离传输方案（光纤方案）
光纤优势：
1、超大距离传输，光纤收发器适用于高速公路工程屏，城市内分散的屏体集中控制；
2、光信号传输，信号不易受干扰，信号更稳定。
运用场合：
发送卡和接收卡之间传输距离较远或者已经布好光缆，必须用到光缆来传输信号。
硬件要求：
一条传输链路需要一对光纤转换器（发送卡-接收端）
使用方法：
发送卡通过网线接到第一个光纤转换器/收发器，第一个光纤转换器通过光纤（100m-25km）接到第二个光纤转换器，第二个光纤转换器用网线接到接收卡。（如下图所示）
指示灯状态说明：
a、侧面6个指示灯示意图；
b、如图中： 1000M灯（左上）：为光纤信号输入输出指示灯；
100M灯（右上）：为100M速率输入输出指示灯；
FX/ACT（左中）：光纤数据传输link/act灯（通讯时闪烁）
TP/ACT（右中）: 网口数据传输link/act灯（通讯时闪烁）
FDX(左下)： 全双工/半双工指示灯
PWR(右下)：电源指示灯
c:当光纤转换器通电后：电源指示灯和全双工/半双工指示灯指示灯亮；
d:正确连接光纤后：光纤信号输入输出指示灯亮；
e:正确连接网线后：网线输入输出指示灯亮；
f:发送卡发送数据时：光纤数据，网口数据link/act灯闪烁；
另有诺瓦，灵信，中庆微，卡莱特，聚成，仰邦，德普达多家控制卡的光纤传输方案，详情欢迎电咨询！
LED large screen sending card, receiving card
Video Processor
Multi-screen switcher
Video Matrix
Video Converter
