HT104 series single mode to multimode converter, also called fiber mode converter, or fiber optic repeater, are applied to 100Mbps Fast Ethernets with hybrid wiring of single-mode and multi-mode fibers. HT104 series single mode to multimode converter can implement mutual conversion between single-mode and multi-mode 1310nm wavelength as well as mutual conversion among 850nm, 1310nm and 1550nm wavelength, and implement signal trunking, so that transmission distance of signal in multi-mode fiber can be extended longer. This kind of single mode to multimode converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
|
Parameters
|
Specifications
|
|
Access mode
|
100Mbps
|
|
Standard
|
Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
|
|
Wavelength
|
850nm/1310nm/1550nm
|
|
Transmission distance
|
Dual-fiber multi-mode:2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km
|
|
Port
|
One multi-mode fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm)
One single-mode fiber port: Single-mode SC/FC fiber port (fiber size: 9/125μm)
Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125μm)
|
|
Conversion mode
|
Medium conversion
|
|
Delay
|
< 0.9μs
|
|
Bit error rate
|
<1/1000000000
|
|
MTBF
|
100,000 hours
|
|
LED
|
POWER (power)
SM LINK (single-mode fiber link)
SM ACT (single-mode fiber link action)
MM LINK (multi-mode fiber link)
MM ACT (multi-mode fiber link action)
|
|
Power
|
External power, DC5V1A
|
|
Power consumption
|
3.5W
|
|
Operating temperature
|
-10~55°C
|
|
Operating humidity
|
5%~90%
|
|
Storage temperature
|
-40~70°C
|
|
Storage humidity
|
5%~90% (non-condensing)
|
|
Dimensions
|
26mm(H)*71mm(W)*95mm(D) (height * width * depth)
|
Information provided in this document pertain to Hotcom products and is subject to change at any time, without notice.
***Fully compatible with TFC-15MS100
