The HT3580-32X Series Routing Switches are high performance switches designed based on fourth generation ethernet switching chip, which are of Standard Standard 1U 19’’ rack mountable; 32x10GE SFP+ Ports. HT3580-32X ’s product position is to meet the requirements of next generation Enterprise, Data Center and Metro networks.
HT3580-48X6Q have large capacity and high density ports of 1G/10G, etc. HT3580-32X ’s OS system software supports mainstream protocols and applications which can be conveniently deployed and managed.
Features
Based on Carrier Grade High performance chip
HT3580-32X series routing switches, which are designed based on fourth generation ethernet switching chip. Which is Carrier Grade high-performance chip which help the HT3580-32X to meet the requirement of Metro/Enterprise/Data Center networks.
It provides 960G bps bandwidth per-chip and supports the follow features:
Completed IPv4/IPv6 protocol stack; multiple IPv4/IPv6 tunnel technique; Datacenter DCB features (PFC / ECN / ETS); Hardware based OAM (802.1ag / Y.1731 /CFM / EFM); Automatic protection switching (APS) in 50ms.
Varied Port Types
Support 1G/10G/40G ports to meet different network requirements.
System Design for Green and Energy Saving
Intelligent FAN adjustment and real-time power consumption monitoring technology are provided for the cost of maintenance redundancy and help to build a green and
energy saving data center.
Customized Profile for Different Deployment Scenarios
The Flexible Table Management (FTM) technology offers multiple table size configuration profiles as optimized choices for different network scenarios. Support
up to 128K MAC address tables. Support up to 32K IP routing tables.
Intelligent ethernet OAM: completed network fault management and
Performance guaranty
With the IEEE802.1ag and ITU-T Y.1731 end-to-end OAM, Ethernet service providers can monitor the services, survey the end-to end performance and ensure the service
quality match the agreement.
The fault management technique includes CCM, LTM and LBM. Performance targets include measure for latency and jitter.
HT3580-32X Support remote management，network monitoring，network fault indication，remote loopback and MIB parameter retrieval according to the standard 802.3ah
EFM.
Data Center Features
HT3580-32X support leading edge Data Center features: Priority Flow Control (PFC), explicit Congestion Notification (ECN) and Data Center TCP, etc.
Support MLAG (Multi-Chassis Link Aggregation) to aggregate links across different devices. MLAG can build an Active-Active system to improve the reliability of the network links from single board grade to device grade. MLAG use a peer link between to devices to aggregate two devices and make them as one device logically. Ports of two different devices join the aggregate ports together and all port can transmit the data traffic. MLAG need to management the device respectively, but the
configurations are easier than stacking, reboot is NOT required after MLAG is configured. Forwarding and configuring are processing on local device, in normal condition the traffic do NOT transmit trough the peer link, the bandwidth of peer link is not the bottleneck of the network and the latency is low.
Support overlay technology (include NVGRE/VXLAN/GENEVE etc.). Overlay can make layer2 packets across the layer3 networks by using NVGRE/VXLAN/GENEVE header to encapsulate the entire ethernet packets. Overlay resolves the problem of MAC table size limitation in traditional layer2 networks, resolves the problem of VLAN id count limitation, and resolves the problem network dynamic adjustment which cannot achieve by VLAN/VPN. Use VXLAN for example, 24 bits VNI identifier can support at most 16777215 logic networks, layer2 networks built by VXLAN can keep the same IP/MAC etc. when move the virtue machine.
MLAG and overlay features are also good candidates for switches in data center network.
HT3580-32X supports RPC-API for SDN(Software Defined Network). SDN is a new architecture of network which can substantially simplify the management and maintenance by separating the control plane and data plane of the network.
High Reliability
HT3580-32X are powered by Hot-swappable power modules which supports AC/DC 1+1 redundancy；Fans support N+1 redundancy；Support Real-time environment monitoring technology to detect the chipset temperature, status of fan and power,etc.
Support LACP / ECMP / VRRP / VARP / STP/RSTP/MSTP / Smart Link / BFD / ERPS /G.8031 / G.8032 / Load-Balancing, etc. to protect the network traffic all-around effectively.
Patented technology “Sysmon” for CPU status monitoring can take action when system is error.
Outstanding QoS Control
HT3580-32X provides 13 hardware queues per-port (8 unicast queues, 4 multicast queues, and 1 monitor queue).Support multi-stage scheduling technology such as WDRR (Weighted Deficit Round Robin) / SP (Strict Priority) and TD (Tail Drop) / WRED(Weighted Random Early Detection) to prevent congestion. Support flexible queue scheduling mechanism to do the shaping for queue or port traffic.
Ingress and egress policer provide intelligent bandwidth monitoring, which support to adjust the granularity according to the port speed. Both srTCM (Single Rate Three Color Marker) and trTCM (Two Rate Three Color Marker) can be supported.
Triple-play Service Support with Bandwidth Guaranty for High Quality Application
HT3580-32X offers high bandwidth for Triple-Play services such as IPTV, video monitoring.
The built-in QoS capabilities and flexible queuing technologies guarantee high quality of services.
Rich multicast protocol set (IGMP Snooping, IGMP v1/v2, PIM-SM) support up to 2K multicast groups and 4K logical replications per group. With CentecOS software,IPTV service and multicast latency control are fully supported.
Comprehensive Network Security Policy
HT3580-32X supports subscriber-class / switch-class / network-class security control.
IPv4 / IPv6 / MAC ACL can filter IPv4 / IPv6 / Non-IP packet respectively. Besides that,extended IPv4/IPv6 ACL which can match Layer2 / layer3 / layer4 information in one rule is available. The ACLs can apply to physical ports / vlan / port group / vlan group. The members of port group or vlan group share a set of ACLs and save the TCAM resource.
ARP Inspection and IP Source Guard features prevent network from malicious ARP attack. Support CPU Traffic Protection, Storm Control and CPU load optimization features. Support centralized 802.1x authentication feature to forbidden illegal user accessing network.
Convenient Management features
Support varied management interfaces, include console port / inband network ports / outband network port / USB port. Support SNMP v1/v2/v3, Support CLI (Command Line Interface), web management, Telnet and FTP connection. Support OAM to make management more convenient, and support SSH2.0, SSL, etc. to ensure security of management.
|
HT3580-32X Hardware Summary
|
|
1. Basic
|
|
Product Name
|
HT3580-32X
|
|
Product Positioning
|
Data
Center TOR access, Enterprise & Metro network access or aggregation
|
|
Switching Method
|
Store
and Forwarding / Cut Through
|
|
CPU Model/ Frequency
|
PowerPC
P1010 667MHz
|
|
Flash
|
2GB
(NAND)
|
|
Memory
|
1GB
|
|
Hardware Configuration
|
Main
Board Spec
|
32x10GE
SFP+
|
|
Uplink Network Sub Card
|
Not
Support
|
|
Console Type
|
RJ45
|
|
Outband Eth Management Port
|
1
RJ45 GE Eth port
|
|
Inband Eth Management Port
|
Support
|
|
USB Ports
|
Support
|
|
2. Performance Spec
|
|
Switching Capacity
|
Switching
Capability
|
640
Gbps (32x10GE)
|
|
Throughput
|
476.2
Mpps
|
|
Latency
|
Min:640ns
Max:770ns
|
|
3. Hardware and Software Description
|
|
Hardware Architecure
|
•
Standard 1U 19'' rack mountable
• 32x10GE SFP+ Ethernet Port
|
|
If Uplink network card support hot plug ?
|
-
|
|
Software upgrade method
|
Through
TFTP/FTP/WEB
|
|
Service interruption time when reboot system for software update
|
less
than 120s
|
|
4. The Power Supply and Power Requirements
|
|
Type of Power Supply
|
AC
|
Support
|
|
DC
|
Support
|
|
Power supply range
|
AC
|
Operating
Voltage: 100 ~ 240V; 50/60Hz
Maximum Voltage: 90 ~ 264V; 47~63Hz
|
|
DC
|
Operating
Voltage: -36 ~ -72V
|
|
Double Power Input ?
|
Support
|
|
The power supply module is pluggable ？
|
Support
|
|
Typical/Max Power Draw
|
120W
/ 150W
|
|
5. Overcurrent and overvoltage protection
|
|
Whether the equipment installation overcurrent, overvoltage
protector ?
|
Yes
|
|
Surge protection level
|
4
KV
|
|
6. Others
|
|
Hardware Size (H×W×D) in.
|
4.36
x 44.0 x 40.0 cm (1.73 x 17.5 x 15.9 in.)
|
|
Weight (kg)
|
7.5kg
(include One PSU)
|
|
Cooling Mode
|
Fan
cooling (Front-to-Rear airflow)
|
|
Quality of Fans
|
4
(3 + 1 Backup)
|
|
Whether to support the fan module pluggable?
|
Support
|
|
If the fan support intelligent speed control function ?
|
Support
|
|
Operating Temperature Range
|
Operating
temperature: 0 to 45 oC
|
Software Features
|
Ethernet Features
|
•Full duplex, half duplex, and auto-negotiation duplex
•Auto-negotiation port speed
•Support Jumbo Frame
•Support Flow Control
•Support Storm Control
•Support Port-block
•Support Port-isolate
•Support L2 Protocol Tunneling
|
|
VLAN
|
•Support 4094 VLANs
•Support VLAN access mode: Access/Trunk
•Support Default VLAN
•Support VLAN Classification
•Support basic QinQ, selective QinQand VLAN Mapping
•Support VLAN statistics
•Support Private VLAN
•Support Guest VLAN
•Support Voice VLAN
|
|
MAC Address Table
|
•Support static MAC address
•Support dynamic MAC address learning and aging
•Support hardware learning
•Support black hole MAC address
•Support MAC Flapping detect
|
|
Link Aggregation
|
•Support Static Link aggregation
•Support LACP
•Support Static load balancing
•Support dynamic load balancing (DLB)
•Support Self-healing
|
|
|
•Support STP/RSTP/MSTP protocol
•Support STP Protocol Protection (BPDUFilter/Guard, Root Guard, Loop Guard, Anti TC-BPDU attack)
•Support Single ERPS ring/tangent ERPS rings/intersecting ERPS rings
•Support ERPS compatible with RRPP
•Support G.8031
•Support G.8032
•Support port Loopback Detect
•Support BFD
•Support VRRP
•Support Smart-link
•Support MLAG
•Support ethernet OAM: EFM/CFM/Y.1731
•Support Software class process monitoring (Sysmon)
•Support Hardware Watch Dog
|
|
|
•Support static ARP
•Support dynamic ARP leaning and aging
•Support Gratuitous ARP
•Support basic ARP-Proxy and local ARP-Proxy
|
|
IPv4 Forwarding
|
•Support IPv4 static routes
•Support IPv4 static routes co-work with IP SLA
•Support VRF
•Support uRPFcheck
•Support RIPv1, RIPv2
•Support OSPFv2
•Support IS-IS
•Support BGP
•Support Route-map and Prefix list
•Support Policy-based Routing (PBR)
•Support ICMP redirect, ICMP error message
•Support ECMP
|
|
IPv6 Forwarding
|
•Support ICMPv6
•Support NDP
•Support PMTU
•Support IPv6 static routes
•Support RIPng
•Support OSPFv3
•Support IPv6 over IPv4 Tunnel
•Support 6 to 4 Tunnel
•Support ISTAP Tunnel
•Support DHCPv6
•Support IPv6 prefix list
|
|
Multicast Features
|
•Support IGMPv1/v2/v3
•Support IGMP agent
•Support IGMP SSM Mapping
•Support PIM-SM, PIM-SSM, PIM-DM
•Support MLDv1/v2, MLDv1/v2 snooping
•Support MVR and MVRv6
•Support PIM-SMv6
|
|
Data Center Features
|
•Support VARP
•Support VXLAN
•Support GRE Tunnel
•Support NVGRE Tunnel
•Support GENEVE Tunnel
•Support DCBX
•Support priority-based flow control (PFC)
|
|
QoS Features
|
•Support traffic classification based on COS/DSCP (simple classification)
•Support traffic classification based on ACL (complex classification)
•Support queue scheduling based on traffic classification
•Support Remark the priority fields (COS/DSCP) of the packet
•Support flow redirection
•Support flow mirror
•Support traffic policing
•Support traffic shaping
•Support traffic statistics
•Support SP (Strict Priority) scheduling
•Support WDRR (Weighted Deficit Round Robin) scheduling
•Support SP+WDRR mixed scheduling
•Support TD (Tail Drop)
•Support WRED (Weighted Random Early Detection)
•Support ECN tags based on TD and WRED
|
|
Security Features
|
•Support SSH
•Support Radius
•Support TACAS+
•Support AAA
•Support port based dot1x and MAC based dot1x
•Support configure dot1x Guest via command or Radius server
•Support access control list (ACL)
•Support traffic classification based on source and destination IP/source and destination MAC/source and destination layer for protocol num/VLAN ID
•Support ACL matching User defined fields (UDF)
•Support ACL active based on Time-Range
•Support ARP inspection
•Support IP source guard
•Support port security to limit the MAC address learning on interface
•Support VLAN security to limit the MAC address learning on interface
•Support CoPP(Control Plane Protect) black & white list and rate limit features
•Support CPU Traffic Limit
•Support Prevent DDOS attack
•Support Support ACL filtering Telnet/SSH login
•Support 802.1AE (MacSec)
•Support Link-Flapping detection
|
|
Configuration and Maintenance
|
•Support DHCP Server
•Support DHCP Relay
•Support DHCP Snooping
•Support DHCP Client
•Support DHCP Option82
•Support RMON
•Support sFlow
•Support IP SLA
•Support IPFIX and MFP
•Support SGT
•Support Latency/Buffer Monitor
•Support EFD (Elephant Flow Detection)
•Support NTP
•Support port Errdisablestate detection and recovery
•Support configure static DNS client
•Support LLDP
•Support port loopback
•Support hardware loopback (internal/external)
•Support to configure system time
•Support to configure time zone
|
|
Debugging Features
|
•Support to Debug based on modules
•Support CPU/memory usage display and alarm
•Support device temperature/PSU/FAN/status display and alarm
•Support user operation logs
•Support Management of logs, alarms, and debugging information
•Support VCT (Virtual Cable Test)
•Support detailed diagnostic-information collection
•Support reboot information logging
•Support network diagnostics (ping/traceroute)
•Support mirror: support use port/vlan/cpuas mirror source
•Support use port/port group/vlan/cpuas mirror destination
•Support ERSPAN
•Support to CPU/From CPU packets statistics
•Support L2 ping
•Support UDLD (Unidirectional Link Detection)
|
|
Management Features
|
•Support inbandand outbandmanagement ports
•Support privileged user priority and privileged commands
•Support Network management based on SNMPv1/v2c/v3
•Support Public and private MIB
•Support Public and private Trap
•Support Configuration and management based on WEB UI
•Support Configuration and management based on WEB UI RPC-API
•Support SmartConfig(Automatically configuration when system start)
•Support OVSDB
•Support change the system specifications by choose different STM Profiles
•Support feature configuration based on License
•Support restore factory default configuration
•Support manual/schedule reboot
•Support upgrade with the local image file/remote TFT server
•Support online upgrade Uboot
|
|
File System
|
•Support file system to manage the files and directories
•Support upload/download files via FTP/TFTP
•Support transmit files via Xmodem
|
