|
|
HT102-PE-FT
|
HT102-PE-GT
|
|
Port
|
1x10/100M RJ45 PD+2X10/100M
RJ45 POE PSE
|
1x10/100/1000M RJ45
PD+2X10/100/1000M RJ45 POE PSE
|
|
POE Parameter
|
PoE standard: meet IEEE802.3af/at
Single port maximum: 15.4W
(IEEE802.3af)
Single port maximum: 30W (IEEE
802.3at)
PoE compatibility: IEEE 802.3af/at
adaptive
PoE port output voltage: 48 ~
57VDC
PoE power supply core: 1 / 2
+; 3 / 6 - or 4 / 5 +, 7 / 8-
|
|
Network transmission medium
|
10Base-T: Cat5 or above UTP（≤250m）
100Base-T: Cat5E or above UTP (≤100m）
1000Base-T: Cat6 or above UTP (≤100m）
|
|
DIP Switch
|
VLAN: ports 1-2 are isolated
from each other (left, indicator light is always on), Poe watchdog is on
Default: normal mode (middle
indicator off), Poe watchdog off
Extend: 10M 1-2 port 250m
(right side, indicator light flashes) Poe watchdog open
|
|
LED
|
PWR
|
ON: power on the equipment
Not on: the device is not
powered on
|
|
Uplink POE
|
ON: POE in port is powered
normally
OFF: POE in port is not
powered normally
|
|
Uplink ACT
|
ON:POE in port data
transmission
Blinking: POE in port data
transmission
OFF: no data transmission at
POE in port
|
|
SW
|
ON：VLAN
Blinking：Default
OFF：Extend
|
|
1-2 POE
|
ON：POE port powering normally
OFF：Extend port no powering
|
|
1-2 ACT
|
ON：POE port no data transmission
Blinking：POE port with data
transmission
|
|
Power supply
|
Input voltage：48~55VDC
Power way: 2PIN terminal block
or lan
|
|
Working environmental
|
Operation temperature:-40~70℃
Storage tempeature：-40~85℃
Humidity： 5%~95%（non-condensing））
|
|
Dimension
|
107*107*30mm
|
