1路RS-232/485/422串口服务器_GPON EPON OLT ONU FTTx Equipment manufacturer|Hotcom

产品分类

Products search

Keyword

Industrial serial Device servers

1-port RS-232/485/422 Serial Device Server

Category : Industrial Ethernet > Industrial serial Device servers

10/100Mbps Ethernet port, support Auto-MDI/MDIX.
ARM® Cortex®-M3 chipset
Support TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client.
Support Baud rate from 600bps to 230.4bps; Support None, Odd,Even, Mark, Space.
Support heartbeat packet and identity packet.
Support RS232, RS485 and RS422 three-in-one interface.
Support web server, ATcommand and setup software to configure module.
Support timeout reset function.
Support TCP Client non-persistent function.
Support DHCP/Static IP.
Support software/hardware reload.
Support virtual serial port with RS232_422_485-ETH_ConfigureTool_V1.1 software.

Description
Parameter
Application
Download
Related

HT505B is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. The product supports 1 RS-232/RS-422 /RS-485 to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes.

HT505B Serial device server supports multiple network protocols, such as TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server, Advanced UDP operating modes and AT, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

HT505B Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

1-port RS-232/485/422 Serial Device Server

Technical parameters:

System information	Chipset：ARM® Cortex®-M3 Flash：128K bytes
Ethernet Port	Standard: 10Base-T, 100Base-TX Protocol: TCP, UDP, ARP, HTTP, ICMP, DHCP, DNS Rate: 10/100M automatic flow control, MDI/MDI-X auto-running Interface quantity: 1 Interface form: RJ45 Duplex mode: full/half duplex mode self-adaption
Serial Port	Standard: EIA RS-232C, RS-485, RS-422 Quantity of serial port: 1 RS-232 or RS-485/422 serial port RS-232 signal: RXD, TXD, GND RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, GND, R+, R- Baud rate: 300-115200bps Data bit: 5bit, 6bit, 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 1.5bit, 2bit Interface form: RS-232, adopt DB9 male; RS-485/422, adopt 5 pins 5.08mm pitch terminal blocks Directional control: RS-485 direction adopts data flow automatic control technology Load capacity: RS-485/422 end supports 32 points polling (customizable 128 points) Pull high/low resistor for RS-485: 2.2kΩ
Configuration	WEB configuration management, serial port AT command, Windows configuration tool
Security	Classification of User Permissions
Indicator	Power supply indicator, Ethernet port indicator, serial port indicator
Power Requirement	6~55VDC, 3 pins 5.08mm pitch terminal blocks Support reverse polarity protection
Working current	150mA@12VDC
Power consumption	<1W
Environmental Limit	Operating temperature range: -40~75℃ Storage temperature range: -40~85℃ Relative humidity: 5%～95%（no condensation）
Physical Characteristic	Housing: IP30 protection, metal Installation: wall mounting Dimension (W x H x D): 70mm×26mm×94mm Weight: 240g
Industrial Standard	IEC 61000-4-2 (ESD, Electro-static Discharge) ，Level 3 Air discharge: ±8kV Contact discharge: ±6kV IEC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3 Power supply: ±2kV Ethernet interface: ±1kV Serial port: ±1kV IEC 61000-4-5 (Surge), Level 2 Power supply: common mode ±2kV, differential mode ±1kV Ethernet interface: ±2kV Serial port: common mode ±1kV, differential mode ±1kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
Certification	CE, FCC, RoHS
Warranty	3 years

Home

Products

Solutions

News

Support

About Us