Power-over-Ethernet (PoE) Media Converters
Description
Hotcom HT101P series is a Single-Port, End-Span IEEE 802.3at High Power over Ethernet converter designed specifically to satisfy the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally.
Hotcom HT101P series High Power over Ethernet converter series is an ideal solution to delivering data and power to network devices directly via the RJ45 Port interface without the need for installing extra power outlets and electrical cabling.
Beneficial Features of PoE Media Converters Provided by Hotcom
A fiber to copper media converter with PoE technology helps bridge the gap between two network types while delivering power to all connected PoE compliant devices including IP cameras. Our PoE powered media converters enable quick signal conversion between copper to fiber cabling and helps extend the signal integrity in noisy environments. They support remote copper port link monitoring, too. Here are some reasons why you can reliably choose a Hotcom's media PoE fiber converter:
--Hotcom’s PoE media converters help bridge the gap between different types of networks while supplying electric power.
--Hotcom’s PoE fiber media converters support 10/100 and 10/100/1000 Ethernet.
--They ensure cost-effective media conversion between 10/100/1000 Base TX ports and 100/1000 Base – TX ports.
--Our PoE media converters are made in China using high quality components and processors.
--These PoE fiber converters are compatible with almost all major brands of switches and routers.
--Our SFP-compliant PoE PSE media converters are assure full wire speed performance. They impose no limit on packet sizes.
--Hotcom’s fiber PoE industrial media converters provide direct media conversion for gigabit copper and fiber.
--All fiber PoE industrial media converters listed here can be connected using DC, PoE cables.
--They have bi-directional communication and have additional mounting options as well.
--All our PoE media converters assure the best conversion latency.
--These devices are provided with a comprehensive range of configuration options such as TP Mode, TP Duplex, TP Speed, Link Fault Pass Through, and Auto Status Report.
--Our PoE fiber media converters assure proven standards of network interoperability as well as compliance.
--Hotcom provide free and unlimited technical support on all of our products.
--All our PoE powered media converters are backed with a lifetime warranty.
--They can be used in different working environments and temperature grades to meet your specific application requirements.
--You can easily combine data and power in your network and also improve the operational efficiencies with our proven fiber PoE media converters.
Technical specifications
|
Interface
|
1 x Ethernet+DC port (RJ45) 10/100Base-Tx
1 x Optical port (1x9 or SFP) 100Base-Fx
|
|
Optical Port
|
Available for 1310nm and 1550nm Single mode, and 1310nm Multi mode
Transfer Distance: up to 120km
Connectors: SC, ST, FC and SFP optional
Fiber core: 8.3μm, 8.7μm, 9μm and 10μm on single-mode fiber; 50, 62.5 and 100μm on multi-mode fiber
|
|
Ethernet Port
|
Cable: Cat 5/5e/6 UTP cable
Available speed: force 10Mbps, force 100Mbps , force 1000Mbps and auto-detective 10/100Mbps. Full-Duplex and Half-Duplex auto-negotiation
Connectors: RJ-45 Connector; MDI/MDI-X connection auto-sensing
|
|
Standard
|
IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX/FX)
IEEE802.3ab (1000Base-T)
IEEE802.3z (1000Base-SX/LX/CX/T)
IEEE802.3x (Flow control)
IEEE802.3af (Power over Ethernet Standard)
IEEE802.3at (Power over Ethernet enhancements Standard)
|
|
PoE Specification
|
Power Output: PoE 48V DC, max 30 watts
PoE Power Supply type: End-Span
Power Pin Assignment: 1/2(+), 3/6(-)
PoE Power Budget: 40 watts
|
|
LED Indicators
|
Power Status, Speed Status, FX Link/Act, TX Link/Act, PoE
|
|
Power Requirement
|
48V DC, 0.7A External AC to DC adapter
|
|
Physical Characteristics
|
Housing: Metal enclosure
Dimensions: 94 x 70 x 26mm
Weight: 0.3kg
|
|
Environmental Limits
|
Operating Temperature: -10°C to 70°C
Storage Temperature: -20°C to 70°C
Operating Humidity: 10% to 90% RH (non-condensing)
Storage Humidity: 5% to 90% RH (non-condensing)
|
|
Warranty
|
2 years
|
Ordering information
Model No. Description
HT101P-3M02: 100Base-Fx to 10/100Base-Tx PoE(PSE), Multi mode, 2km, SC/ST/FC
HT101P-3S20: 100Base-Fx to 10/100Base-Tx PoE(PSE), Single mode, 20km, SC/ST/FC
HT101P-3S40: 100Base-Fx to 10/100Base-Tx PoE(PSE), Single mode, 40km, SC/ST/FC
HT101P-5S80: 100Base-Fx to 10/100Base-Tx PoE(PSE), Single mode, 80km, SC/ST/FC
HT101P-5S120: 100Base-Fx to 10/100Base-Tx PoE(PSE), Single mode, 120km, SC/ST/FC
HT101P-3S20B/5S20B: 100Base-Fx to 10/100Base-Tx PoE(PSE), Bi-Directional, 20km, SC/ST/FC
HT101P-3S40B/5S40B: 100Base-Fx to 10/100Base-Tx PoE(PSE), Bi-Directional, 40km, SC/ST/FC
HT101P-4S80B/5S80B: 100Base-Fx to 10/100Base-Tx PoE(PSE), Bi-Directional, 80km, SC/ST/FC
HT101P-SFP: 1*SFP Port to 10/100Base-Tx PoE(PSE)
Notes:
Compatible model:
FTP-802 / FTP-802S15
PoE Fiber Media Converter Applications
These are some application areas of our PoE powered media converters:
IP cameras
Surveillance systems
Remote access through wireless connectivity
Smart home devices connected across buildings or gated communities
