Overview:
HT304XGI-TF2 is our self-developed 10Gbps uplink industrial Ethernet switch, providing four 2.5G/1Gbps RJ45 ports and two 10Gbps SFP+ optical ports, and supporting two working modes: standard switching and VLAN isolation.
HT304XGI-TF2 switch has 2 10Gbps SFP+4 2.5G interfaces with rich ports and backward compatibility to meet the demand of high-speed networking, supports VLAN isolation, suppresses network storms, and improves network performance.HT304XGI-TF2 uses aluminum alloy casing with high efficiency heat dissipation, and is suitable for high-speed networking scenarios in a variety of harsh environments.Technical specifications:
Interfaces |
4 x electrical ports(RJ45) ,10/100/1000/2.5GBase-Tx 2 x optical port 10G SFP+/1G |
Optical port characteristics |
Speed: 10Gbps, backward compatible with 1Gbps Wavelength: single-mode fiber 1310nm, 1550nm, 1330/1270nm, 1490/1550nm; multimode fiber 850nm Transmission distance: 0~120km Interface type: SFP+ Fiber core standard: single-mode 9/125μm; multimode 50/125μm, 62.5/125μm Transmission distance: Multimode: 300m Singlemode: 20/40/60/80/100KM |
Copper port characteristics |
Speed: 10/100/1000/2500Mbps adaptive Duplex mode: full/half duplex Interface type: RJ-45 Connection mode: straight-through line / cross-line auto-identification Transmission distance: 100m |
Standard |
IEEE802.3(10Base-T) IEEE802.3u(100Base-TX/FX) IEEE802.3ab(1000Base-T) IEEE802.3z(1000Base-SX/LX/CX/T) IEEE802.3x(Flow control) IEEE802.3af(PoE) IEEE802.3at(PoE+) |
PoE Features(optional) |
Output power: 48V DC, 30W max per PoE port Wiring definition: 1/2(+), 3/6(-), end-span |
Exchange Properties |
Backplane bandwidth: 256G Packet forwarding rate: 35.888Mpps MAC address table: 4K Packet buffer: 8Mbit Forwarding frame length: 64~15360 bytes Switching delay: <5μs |
DIP |
VLAN: 1X-4X only communicate with FX1/FX2 when ON, exchange data normally when OFF. 10G Fiber: 10G rate is mandatory for time port in 0N, 1.25G/10G adaptive in OFF. |
LED |
RJ45 Port yellow indicator: when port rate is 2.5G, on when port rate is 1000/100/10M, off RJ45 Port Green indicator: When the link of any rate of RJ45 port is normal: on ; When data exchange: blinking FX1, FX2 indicator: When the link of optical port is normal: on When data exchange: blinking PWR indicator: On when the power supply of the device is normal |
Power supply |
Input voltage:12~52VDC |
Power consumption |
≤15W(stand-by) |
Mechanical characteristics |
Housing Material: aluminum alloy Dimensions: 145 x 125 x 48mm (without connector protrusion) Weight: 0.5kg |
Working Environment |
Operating temperature: -40°C ~ 75°C Storage temperature: -45°C ~ 85°C Relative Humidity: 10% ~ 90% RH (no condensation) |
Lightning protection |
Port lightning protection: 8KV 8/20us. |
Warranty |
Warranty period: 5 years |