Overview
HT316GP-SFPG2 series unmanaged PoE switches have 16 Gigabit Ethernet ports + 2 Gigabit uplink SFP optical slots, of which ports 1-16 support IEEE 802.3af/at standard PoE power supply, with a single-port PoE power of up to 30 W. HT316GP-SFPG2 service ports are supported by 4KV electrostatic lightning protection, and have a one-key port VLAN function to suppress network broadcast storms and improve network transmission stability; as a PoE-powered device, it can automatically detect and identify standard-compliant powered devices and supply power to them through the network cable. VLAN function to suppress network broadcast storms and improve network transmission stability; as a PoE power supply device, it can automatically detect and identify standard-compliant powered devices and supply power to them through the network cable. It can supply power to wireless AP, webcam, IP phone, visual access control intercom and other POE terminal devices through the network cable to meet the demand for high-density PoE power supply network environment, which is suitable for hotels, campuses, parks, neighborhoods, and small and medium-sized enterprises to set up cost-effective networks.
Technical specifications
Model |
HT316GP-SFPG2 |
|
Port Feature |
||
Fixed port |
Downstream Ports |
16*10/100/1000Base-T RJ45 ports |
Uplink Ports |
2*1000M SFP optical ports |
|
PoE Ports |
1-16 support IEEE802.3af/at standard PoE power supply, transmission distance 100 meters |
|
RJ45 Port |
1-16 ports 10/100/1000M adaptive, full/half duplex MDI/MDI-X adaptive |
|
Twisted-pair transmission |
10BASE-T:Cat3,4,5 UTP(≤100 meter) 100BASE-TX:Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter) |
|
Optical port characteristics |
Gigabit SFP fiber optic interface, the default does not match the optical module, need to purchase, (optional order mode/multimode, single fiber/dual fiber optical module, LC/SC) |
|
Fiber cable |
MMF:850nm 0~550M SMF:1310nm 0~40KM,1550nm 0~120KM 。 |
|
Function Switch |
1 (VLAN), when turned on, ports 1-4 are isolated from each other, optimizing packet forwarding cache and suppressing broadcast storms |
|
Switching Features |
||
Network management |
Non-management |
|
Network protocol |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3x Flow Control; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE 802.3af DTE Power via MDI; IEEE 802.3at DTE Power via MDI; |
|
Forwarding Mode |
Store-and-forward (full wire speed) |
|
Backplane Bandwidth |
52Gbps(non-blocking) |
|
Packet forwarding rate @ 64byte |
26.78Mpps |
|
MAC Address Table |
8K |
|
Packet Forwarding Cache |
4Mbits |
|
Jumbo Frames |
10Kbytes |
|
LED |
Power indicator: PWR (green); Network indicator: 1~16Link/Act (green); PoE 1~16 indicator: PoE (yellow); Optical port indicator: SFP 17~18 (green). |
|
MTBF |
100,000 hours |
|
POE&Power Features |
||
POE port |
1-16 port support IEEE802.3af/at |
|
Power supply pins |
Default 1/2(+), 3/6(-) 4-pin power supply |
|
Maximum PoE power per port |
30W, standard IEEE802.3af/at |
|
Total Power/Input Voltage |
250W (AC100-240V) |
|
Power Consumption |
Standby power consumption: <15W; Full load power consumption: <250W |
|
Matching Power Supply |
Built-in switching power supply AC: 100-240V 50-60Hz 5.0A |
|
Physical Specifications |
||
Operating Temperature/Humidity |
-20~+55°C;5%~90% RH non-condensing |
|
Storage Temperature/Humidity |
-40~+75°C;5%~95% RH non-condensing |
|
Dimension (L*W*H) |
440*190*45mm |
|
Net/Gross Weight |
<2.5kg / <3.0kg |
|
Installation |
Desktop, Rack-mounted |
|
Certifications & Warranties |
||
Lightning Protection/Protection Levels |
Port lightning protection: 4KV 8/20us; Protection rating: IP30 |
|
Safety Certification |
CE,FCC,RoHS,CCC |
|
Warranty |
2 year |