● Up to 11.1Gb/s data links ● Up to 80Km transmission on SMF ● 1270nm/1490nm DFB Laser and APD receiver 1330nm/1550nm DFB Laser and APD receiver ● EEPROM with serial ID Functionality ● 2-wire interface with integrated Digital Diagnostic monitoring ● Hot-pluggable SFP+ footprint ● Specifi

Asymmetric 10G-PON is specified as XG-PON1: 10 Gbit/s downstream and 2.5 Gbit/s upstream (nominal line rate of 9.95328 Gbit/s downstream and 2.48832 Gbit/s upstream). Symmetric 10G-PON is also proposed as XG-PON2 with 10 Gbit/s upstream, but would require burst-mode lasers on ONTs to deliver the up

Hot-pluggable SFP28 form factor Full-duplex transceiver module 1310nm DFB laser and PIN photo-detector Compliant with SFP28 MSA and IEEE 802.3cc 25GBASE-LR Data rate up to 25.78125Gbps Reach up to 10km over SMF Power consumption < 1.5W Dual LC receptacles Operating case temperature

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x 850nm VCSEL array and PIN photo-detector array Compliant with QSFP MSA, IEEE 802.3ba 40GBASE-SR4 and OTN OTU3 Data rate up to 44.6Gbps Reach up to 300m (OM3) or 400m (OM4) over MMF Power consumption < 1.5W MPO12 rece

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x 1310nm DFB lasers and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Supports CDR bypass Compliant with QSFP28 MSA and 100G PSM4 MSA Data rate up to 103.125Gbps Reach up to

• Compatible with brands like:Dell,Brocade,Allied Telesis,Mellanox,HPE Aruba/HPE,Cisco,3Com,Tp-link,Supermicro,Zyxel,Huawei,ZTE,Ubiquiti,Avaya,Arista,Solarflare,Dell,Fortinet,MikroTik,Intel,Nortel,Netgear,Ruckus,Synology,QNAP,F5 Networks,Planet,D-link,Extreme,Juniper,Generic compatible •

Supports 850Gbps Single 3.3V Power Supply Power dissipation < 15W 8x53.125GBd (PAM4) Electrical Interface MPO-16 Connector APC Case Temperature Range: 0°C to 70°C VCSEL Transmitter PIN and TIA Array on the Receiver Side I2C Interface with Integrated Digital Diagnostic Monitoring Safety Cert

Supports 206.25Gb/s(8x NRZ 25.78125Gbps) aggregate bit rate Reach up to 70m (OM3) or 100m (OM4) over MMF 8x 850nm VCSEL array and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Single MPO-16 receptacle Compliant with QSFP-DD MSA, IEEE 802.3bm 100GBASE-S

Hot-pluggable QSFP-DD form factor Supports 103.1 Gb/s aggregate bit rates Power dissipation < 8W RoHS-6 compliant (lead-free) Commercial case temperature range 0°C to 70°C Single 3.3V power supply Maximum link length of 100m on multimode Fiber (MMF) with FEC MPO receptacles I2C management in

•Supports 11.3Gb/s bit rates •Duplex LC connector •Hot pluggable SFP+ footprint •Uncooled 1310nm/1550 DFB/APD transmitter, PIN photo-detector •Applicable for 10~100km SMF connection •Low power consumption, < 1W •Digital Diagnostic Monitor Interface

MSA SFF-8431 compliant Supports serials data rates up to 10Gbps Hot pluggable High cost effective to Fiber optics solution Low power consumption Enhanced EMI suppression Differential impedance 100ohm

-IEEE 802.3z 1000BASE-SX, 1000BASE-LX, and 1000BASE-ZX compliant. -Supports 1.25 Gbps data transfer. SFP MAS protocol compliant, hot-swappable -Support different transmission distances from 550m~120km. -Data Diagnostic Function (DDM) available -Single 3.3V power supply -Meet EMI, ESD requireme