The HT-PI102-at is a Gigabit Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments.

The HT-PI102-at supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3at PoE standard and is backwards to IEEE802.3af. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points.

By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in HT-PI102-at, people can get the benefit of flexible network installation at lower cost, less downtime.

Highlights

Convert Non-PoE to PoE: Upgrade your network with a 15.4W/30W/48V PoE+/poe/poe+ injector, enabling PoE without replacing existing switches

1Gbps High-Speed Performance: Supports 10/100/1000Mbps speeds with protection against over voltage and short circuits

Long-Range Connectivity: Extend power and data up to 100m (328ft) using Cat5e/Cat6 cables for remote devices

Auto Detect the Required Power, Up to 30 W

Standard 802.3af/at for Various Powered Devices

Plug-and-Play Setup: No software or configuration needed, perfect for IP cameras and access points