Asymmetric 10G-PON is specified as XG-PON1: 10 Gbit/s downstream and 2.5 Gbit/s upstream (nominal line rate of 9.95328 Gbit/s downstream and 2.48832 Gbit/s upstream). Symmetric 10G-PON is also proposed as XG-PON2 with 10 Gbit/s upstream, but would require burst-mode lasers on ONTs to deliver the up

Up to 25.78Gb/s data rate 1270nm DFB laser and PIN receiver 1330nm DFB laser and PIN receiver 2-wire interface with integrated Digital Diagnostic monitoring Up to 30km transmission on SMF BIDI LC optical connector Single +3.3V power supply RoHS-6 compliant and lead-free Compliant with SFF

Up to 25.78Gb/s data rate 1270nm DFB laser and PIN receiver 1330nm DFB laser and PIN receiver 2-wire interface with integrated Digital Diagnostic monitoring Up to 10km transmission on SMF BIDI LC optical connector Single +3.3V power supply RoHS-6 compliant and lead-free Compliant with SF

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x uncooled CWDM FP lasers with AAWG MUX High-sensitivity PIN-TIA with AAWG DEMUX Compliant with QSFP MSA and IEEE 802.3ba 40GBASE-LR4 Data rate up to 41.25Gbps Reach up to 10km over SMF Power consumption < 3.5W Duplex

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x cooled LAN-WDM DML transmitter and PIN ROSA Internal CDR circuits on both receiver and transmitter channels Compliant with QSFP28 MSA and IEEE 802.3ba 100GBASE-LR4 Data rate up to 103.125Gbps or 111.8Gbps Reach up to

Duplex LC receptacle optical interface Single +3.3V power supply Transmitter: Cooled LAN-WDM DML TOSA Receiver: LAN-WDM PIN ROSA Optical Interface: 26.5625 GBd PAM4 x 4 wavelength Electrical Interface: 26.5625 GBd PAM4 x 4 lane 200GAUI-4 Operating case temperature range: 0℃ to 70℃ Power

•Supports 9.95 to 11.3 Gb/s bit rates •Duplex LC connector •Hot pluggable SFP+ footprint •Cooled EML transmitter and APD receiver •Applicable for 100km SMF connection •Low power consumption, < 1.5W •100 GHz channel spacing •Digital Diagnostic M

• Connector A: 1x QSFP 40Gbps Rated Connector (MSA SFF-8436 Compliant) • Connector B: 4x SFP+ 10Gbps Rated Connector (MSA SFF-8431 Compliant) • Compliant with IEEE 802.3ba 40GBASE-CR4 standard • Up to 10.3125Gbps transfer rate per SFP+ channel (40 Gbps aggregate) •

o Single-fiber, bi-directional, hot-swappable SFP with SC/UPC interface o Up to 2.5Gbps operating rate o 1490nm DFB-LD transmitter and 1310nm burst mode APD-TIA receiver o DDM support provides diagnostic testing for power, temperature, transmit and receive status, and lifetime. o Transmission di

▪ Hot-pluggable SFP28 form factor ▪ Full-duplex transceiver module ▪ 1310nm Cooled EML laser and APD photo-detector ▪ Internal CDR on both transmitter and receiver channels ▪ Compliant with SFP28 MSA and IEEE 802.33cc 25GBASE-ER ▪ Compliant with CPRI/eCP

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x 1310nm FP lasers and PIN photo-detector array Compliant with QSFP MSA, IEEE 802.3ae 10GBASE-LR and OTN OTU3 Data rate up to 44.6Gbps Reach up to 1.4km over SMF Power consumption < 3.5W MPO12 receptacle Oper

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x cooling CWDM DFB transmitter and PIN ROSA Internal CDR circuits on both receiver and transmitter channels Non-airtight optical engine design Compliant with QSFP28 MSA, 4WDM-10 MSA and InfiniBand EDR Data rate