Support resolutions up to 3840*2160@30Hz Supporting bidirectional Audio（Microphone） Support copy EDID Support RS232 transmission (baud rate 115200) Automatically adjust video compression rate to ensure smooth video stream High-speed ASIC technology ensures near-zero latency for remote images S

Support POE Mode-A (12+/36-) Mode-B ((45+/78-) to provide 24.9k detection signal to PSE Dual-mode detection conforming to IEEE802.3af, adaptive 100Mbp Port Rate Through the design of two-stage lightning protection chip, at the same time avoid static induction, circuit isolation protection Plug a

Optical port rate: supporting 2Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps; SFP slot design, optical modules can be configured according to actual needs Emission wavelength: support the WDM wavelength specified by ITU-T; Transparent access: support flexible and transparent access to services such a

Features and Benefits •10/100/1000BaseT(X) and 1000BaseSFP slot supported •Link Fault Pass-Through (LFPT) •Power failure, port break alarm by relay output •Redundant power inputs •-40 to 75°C operating temperature range (-T models) •Designed for hazardous lo

Maximum split ratio of 1:128, connecting up to 1024 ONTs Rich Layer 2/3 switching features, flexible management methods Comply with ITU-TG.984/G.988 standard Support FlexLink, STP, RSTP, MSTP, ERPS, LACP, ACL, QoS Support 64K MAC address Support RIP、OSPF、BGP、ISIS and IPV6 Support ONU authentic

48*1000M/10G/25G Bae-X SFP28, 8*40/100G Base-X QSFP28 Supports IPv4/IPv6 Dual Stack Platform Supports a variety of link redundancy and network redundancy protocols, such as STP/RSTP/MSTP/ERPS/LACP Supports consolidation of the processing power of multiple switches into a single logical device

● Din-Rail mounting, small size, strong and durable ● 2-port 100M industrial Ethernet interfaces ● Support socket operation mode, including TCP/UDP Server and TCP/UDP Client ● 4 photoelectric isolation serial ports, software optional RS232/422/485 ● Support SNMP, MIB network management functions

8x100/1000Base-T and 1 x 10G Base-X SFP optical ports 8 physically isolated 1000Mbps full-duplex RJ45 ports with 1Gbit/s bandwidth on a single port Fibre optic module supports hot-swapping DC 5-16V input Good EMC/EMI performance ensures stable operation in complex electromagnetic environment

Easy to put the fiber terminal box inside Easy to install on the ground Provides mechanical and environmental protection of splice and cable storage areas Constructed of non-metallic HDPE to resist rust, corrosion, and impact.

Water-proof design with IP-65 Protection Level.

• Low insertion loss • High back reflection loss • Rated OM5 to offer a wideband 50/125 multimode fiber solution • Provides an upgrade path from 40 Gbps to 100 Gbps and beyond • Backward compatible with OM3 and OM4 applications • Low-Smoke, Zero Halogen (LSZH

There are two 20mm cable inlet ports at the back, and equipped with cable protection rubber ring, fiber optic cable compression and reinforcement core fixing device. High-quality cold-rolled steel molding Electrostatic spraying is even and flat Comply with ROHS certification standards Comply wit