Duplex LC receptacle optical interface Single +3.3V power supply Transmitter: Cooled LAN-WDM DML TOSA Receiver: LAN-WDM PIN ROSA Optical Interface: 26.5625 GBd PAM4 x 4 wavelength Electrical Interface: 26.5625 GBd PAM4 x 4 lane 200GAUI-4 Operating case temperature range: 0℃ to 70℃ Power

-RTL chipset -Dual mode ONU,can detect and exchange PON mode automatically -Bridging and routing modes can be set -Gigabit WiFi6 2.4GHz & 5GHz Dual Band Speed up to 1.8 Gbps -2.5Gb RJ45 connector for higher bandwidth transmission, such as connecting to a WiFi6 router -USB3.0 Interface for Share

• IEEE 802.3af/at power on the POE port • Auto-negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex • The UTP port supports the connection of MDI/MDI-X auto crossover • Gigabit Open SFP slot to customize the network extension dis

•4*1G/2.5G/10G SFP+ slots uplink，16*1G SFP ports + 8*1G SFP/RJ45 COMBO ports downlink, 1* RJ45 console interface for switch basic management and setup •Layer 3 routing features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP •Port aggregation: Supports GE ports,

Features ●Low insertion loss ●Good interchangeability and pluggability ●Compliant with ROHS requirements ●Wide range of MPO practices ●High quality inserts with precise PIN pin alignment ●Drawings are available, MTP can be provided ●Telcordia GR-326RCORE standard

Industrial DIN-rail design, designed for harsh and demanding industrial environments. The device provides 1 gigabit Ethernet port + 1 RS232/422/485 to 1 gigabit SFP optical interface, the transmission bandwidth of line speed 1000M. The switch has a built-in 1Mbit MP-SSRAM high-speed memory, non-bl

•Supports 9.95 to 11.3 Gb/s bit rates •Duplex LC connector •Hot pluggable SFP+ footprint •Cooled EML transmitter and APD receiver •Applicable for 100km SMF connection •Low power consumption, < 1.5W •100 GHz channel spacing •Digital Diagnostic M

• Connector A: 1x QSFP 40Gbps Rated Connector (MSA SFF-8436 Compliant) • Connector B: 4x SFP+ 10Gbps Rated Connector (MSA SFF-8431 Compliant) • Compliant with IEEE 802.3ba 40GBASE-CR4 standard • Up to 10.3125Gbps transfer rate per SFP+ channel (40 Gbps aggregate) •

o Single-fiber, bi-directional, hot-swappable SFP with SC/UPC interface o Up to 2.5Gbps operating rate o 1490nm DFB-LD transmitter and 1310nm burst mode APD-TIA receiver o DDM support provides diagnostic testing for power, temperature, transmit and receive status, and lifetime. o Transmission di

Aging resistance: good stability for heat, heat radiation, air, ozone, etc. Corrosion resistance: strong resistance to dilute acid, salt water, oxidant, aliphatic hydrocarbon, etc. Sealing technology: adopt the reusable sealing component to ensure the good airtight and waterproof performance. Mec

Easy racks and cassette modules installation 100% tested before delivery MTP And MPO available Use 8/12/24 Cores Fiber Connector SM/OM1/OM2/OM3/OM4 or Customized LSZH, OFNR, OFNP available Compliance with Telecordia GR-1435-Core Compliant

Stranded optical cable structure, non-metallic center reinforced core, so that the optical cable can withstand greater tension High density, large capacity and compact structure of optical fiber The external protection material is corrosion-resistant and waterproof. Anti UV, flame retardant, envir