Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x cooling CWDM DFB transmitter and PIN ROSA Internal CDR circuits on both receiver and transmitter channels Non-airtight optical engine design Compliant with QSFP28 MSA, 4WDM-10 MSA and InfiniBand EDR Data rate

Convert Non-PoE to PoE:With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of Our PoE injector High Speed Gigabit Ports:Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port 802.3at/af /BT

Universal AC input/ full range Protections: Short circuit/ Over load/ Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 isolation class 2 LED indicator for power on 100% full load burn-in test 2 year warranty

1.Full digital, zero compression and zero delayed 2.Support HDCP standard 3.Support 10Gbps data rate 4.Compatible with HDMI1.4 5.Support 3D 6.Support video resolution up to 4K*2K@30Hz. 7.Support copy EDID. 8.Transmits HDMI video signals up to 60km over one fiber optic cable. 9.compatible wit

• Compatible with IEEE802.3af and IEEE802.3at • Extends the range of PoE and Ethernet an additional 100 meters • No additional power supply is required • Automatically detects and protects PoE equipments from being damaged by incorrect installation • Full-rate netwo

· Protocol supported: IEEE802.3z 100BASE-SX/LX · Supporting full-duplex and half-duplex network communications; · Capable of mutual conversion between 850nm multi-mode fiber and 1310nm/1550nm single-mode fiber; · Support max speed of 1.25Gbps · Fiber port support SC、FC、ST、LC · Supporting direct

• Supporting Two 10/100/1000M copper and one 1000M Optical Port • Optical port SC/ST/FC optional and distance 2~120km optional • Optional 24V/220V power input • Industrial IP40 Protection grade • Support Din-rail and wall-mount installation

• All-digital, uncompressed high-definition optical fiber transmission • LC interface, can plug out the sick code SFP optical module, transmission distance is optional • 1U rack type • With 1 Reverse RS485 Data • Clock Recovery, Clock Shaping • Pass Pathologi

The plug-and-play design makes installation simple and straightforward, with no on-site adjustments required. High-efficiency decoding and powerful processing and recognition capabilities. Genuine imported chips. Ultra-long-distance transmission, supporting both single-mode and multimode transmis

OSFP MSA 5.0 and CMIS 5.1 compliant Dual MPO-12/APC optical connectors 8x106.25Gbps (53.125GBd PAM4) electrical interface 8x106.25Gbps (53.125GBd PAM4) optical interface Up to 500m over SMF Power dissipation ≤ 16W Operating case temperature: 0°C to 70°C IEEE802.3ck and IEEE 802.3df compliant

103.125 Gbit/s Single Rate Supports 53.125Gbaud Up to 500m transmission on single mode fiber (SMF) with FEC 4 x 25.78125G channel CAUI-4 Electrical Interface 4 x 26.5625G channel 100GAUI-4 Electrical Interface light source: Single channel 1310 nm EA-DFB LD Receiver: Single channel PIN photo d

Industrial-grade design, bidirectional communication, and user-friendly operation Isolated communication with interference resistance; communication features high-speed optocoupler isolation protection Built-in DC-DC power isolation module with high-performance transient voltage suppressors No so