•Supports 11.3Gb/s bit rates •Duplex LC connector •Hot pluggable SFP+ footprint •Uncooled 1310nm/1550 DFB/APD transmitter, PIN photo-detector •Applicable for 10~100km SMF connection •Low power consumption, < 1W •Digital Diagnostic Monitor Interface

MSA SFF-8431 compliant Supports serials data rates up to 10Gbps Hot pluggable High cost effective to Fiber optics solution Low power consumption Enhanced EMI suppression Differential impedance 100ohm

Data-rate of 1.25Gbps operation Class 1 laser product EN 60825-1 standards Compliant with SFP MSA and SFF-8472 with duplex or Simplex LC receptacle SC receptacle available for Bidi Digital Diagnostic Monitoring:Internal Calibration or External Calibration Tranmission distance: 550m~160km Compa

Supports single-fiber bi-directional data transmission for GPON and EPON networks With MAC function Downstream 2.488Gbps, upstream 1.244Gbps, support 20km transmission distance SFP package design, support hot-swappable, easy installation Equipped with digital diagnostic and monitoring functions t

1.Suitable for ordinary fiber and ribbon fiber. 2.Fully kitted with all parts for convenient operation. 3.Overlap structure in splicing tray for easy installation. 4.Fiber-bending radium guaranteed more than 40mm. 5.Easy to install and re-entry with a common can wrench. 6.Excellent Anti-removab

Tight sleeve optical fiber is used for easy stripping Tight fiber has good flame retardant performance The aramid reinforced elements make the optical cable have excellent tensile properties The external protection material has the advantages of corrosion resistance, water resistance, UV protecti

PLC splitter MINI module has excellent performance parameters The PLC splitter is insensitive to wavelength and has full-band signal transmission from 1260 to 1650 nm. The PLC splitter has lower channel uniformity, ensuring that each channel can be reach almost the same when distributing optical p

Low Insertion Loss High isolation Low Polarization Dependent Loss Compact design Wide operating wavelength range High reliability and high stability Telcordia GR-1209-CORE-2001 compliant Telcordia GR-1221-CORE-1999 compliant RoHS-6 compliant (lead free)

Adopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e

4 independent full-duplex channels Up to 11.2Gbps per channel bandwidth Aggregate bandwidth of > 40Gbps MTP/MPO optical connector QSFP MSA compliant Digital diagnostic capabilities Capable of over 100m transmission on OM3 Multi-mode Fiber (MMF) and 150m on OM4 MMF CML compatible electrical I/

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x 850nm VCSEL array and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Supports CDR bypass Compliant with QSFP28 MSA, IEEE 802.3bm 100GBASE-SR4 and InfiniBand EDR Compli