千兆PoE 1光1电SFP插槽型

概述：

HT102P-SFP系列PoE(PSE)以太网光纤收发器可用于以太网的电接口与光接口之间的转换，同时通过网线直接给后端设备供电，完全兼容PoE(以太网供电)技术标准IEEE802.3af和IEEE802.3at，因此后端的PoE(PD)设备可以灵活安装而不必考虑电源布线的问题。本光纤收发器包含1个10/100/100M以太网电口和1个千兆光纤接口，它将以太网的传输距离从铜芯双绞线的100米延长至550米（多模光纤）或120千米（单模光纤）。

HT102P-SFP系列可以方便地实现各种网络设备之间的互联，适用于电信、广电、宽带网络、安防监控等需要高性能、高可靠性的网络环境中。

应用方便灵活
可选择插入IEEE 802.af国际标准PoE设备，像无线访问点AP或基于IP的网络监控摄像头。放置这些IEEE802.3af国际标准的PoE终端设备到需要放置的位 置——墙壁的高处或者天花板上为最大的覆盖—或其它你需要放置它们的地方。通过标准的5类以太网线传输电源和数据。非常方便灵活，特别受到安防监控网络摄 像机安装工程商的喜爱。

即插即用
基于标准的HT102P-SFP轻易的整合了你现有的10/100以太网络，并自感知和自调整网络的速度和网线类型。对于PoE，这交换机自动发现兼容IEEE802.3af的PoE终端设备，并且提供所需的电源。前面板指示灯可持续监测交换机的信息和PoE的工作状态。

静音和紧凑
小巧便利的设计， 耐用的金属外壳。它可以使用包装盒内置的配件轻易的被安置在桌面或者墙上。无风扇设计安静的溶入你的小型办公室的环境。

超值
将数据交换和基于以太网供电整合入了一个单位内， HT102P-SFP节省了空间，减少了线缆并且消除了连接电源插座的需要—最小化安装费用，简单化了PoE性能设备的安装，和消除了需要专职电工或延 长电源线的麻烦。总的来说， 一个最大好处是具有最经济的价格。

绿色环保
较之非绿色版本节能60%，自动待机模式和线缆长度侦测功能——即端口未连接时，自动待机模式节省能源；网线短于10米时，更低的传输功率。包装中至少80%的可回收资源



适用环境
◆ 百万高清监控传输与供电

◆ 无线AP布局传输与供电
◆ 网络电话传输、智能家居系统
◆ 城市智能交通监控系统（ITS）、平安城市、无线城市
◆ 高速公路监控系统、电子道路监控、抓拍系统
◆ 大型厂矿企业安防监控系统、网络多功能系统
◆ 远程多媒体教学/ 校园监控、电视会议系统
◆ 楼宇对讲、无线通信 、视频监控

POE供电千兆SFP光纤收发器

技术规格

Power Adapter: To order the corresponding country-specific power supply, add the extension from the list below to the end of the model.

For example: HT102P-SFP-EU, -EU = Country Code (EU = Europe, US = North America, UK = United Kingdom, SA = South Africa, CN = China)

Reference Equipment

Hotcom SFP PoE Media Converter can be compatible or replace with the below equipment, providing you the same high performance at a lower cost to meet your network upgrade needs.

What is PoE Media Converter?

A fiber media converter is a simple but effective device that converts fiber optic and other types of media. Fiber media converters are most commonly used to transmit data between fiber and copper in order to extend a network or add fiber optic cabling into a copper based network. Because these devices can be deployed practically anywhere in the network and are inexpensive, they are also being used for a variety of additional purposes. More about fiber media converter, please check here.

What is PoE Media Converter?

PoE media converters combine data and power on a single cable, allowing for copper to fiber connectivity while enabling Power over Ethernet to PoE certified devices including wireless access points, IP cameras, and VoIP phones. The converter interfaces between the fiber infrastructure and copper ports on VoIP phones and also provides power to the IP phone. The PoE media converter excels in industrial and high-density applications because to its perfect compliance with Fast Ethernet standards. PoE fiber converters can be used to bridge the gap between different types of business networks and even expand network connections beyond normal cabling.
How does PoE Media Converter work?
The data transmission between a fiber switch and a remote or wireless access point is supported by a typical 10/100/1000M PoE media converter. This media converter also provides power to the access point. A fiber optic cable connects the fiber switch to the PoE media converter. The fiber is run a far way to the PoE media converter, which converts the fiber back to copper UTP and is positioned near a DC or AC power source. PoE (DC power) is injected via the UTP cable by the PoE media converter, which also serves as a micro switch for power supply. The IP camera is positioned at the opposite end of the UTP cable, up to a hundred meters distant from the PoE media converter.

How to select a PoE Media Converter?
To select the right PoE media converters for your project, many elements should be considered. You should firstly consider where you want to use the media converters and how to use them. Then, you should know the functions and characters. Below are some important factors to consider when choosing PoE media converter.
Data Rate: the data rate of the PoE media converter should be firstly considered. The most commonly used are 10/100mbps, 10/100/1000mbps, and 1000mbps.
Mode Type: the mode type of the PoE media converter can be split to single mode and multimode. When connected to a switch or hub that supports half duplex, packet loss may occur since some PoE media converters can only be used in full duplex mode. As a result, check to see if the PoE media converter supports half duplex, full duplex, or both half duplex and full duplex.
Port Type and Port Number: PoE media converter also has various port types. The most commonly used types for fiber optic on the fiber media converters are ST, SC and SFP. The number of the power should depend on the applications.
Power Requirement: the most commonly used are AC power supply, DC power supply, internal power supply, and external power supply.

Summary

Nowadays, several advanced PoE media converters are available to assist maximize the value of hybrid networks with fiber links. Depending on the PoE fiber converter, it can be connected to a variety of devices to provide both power and data. If you have any questions, you can contact us.
H&T offers complete series of PoE Media Converters, including 10/100 POE media converter, 10/100/1000M media converter,multi-port PoE media converter, 10G uplink PoE media converters etc. For more information, please visit www.htopto.com or call us @0086-13922888473.