1. The fiber fixation and protection function: Fiber inlet, fixation, and protection device should be provided. The fibers will be protected from being damaged when they are let in and fixed in the frame through these devices. The metal parts of the cables are insulated from the machine. The metal

•4*1G/2.5G/10G SFP+ slots uplink，16*10/100/1000Base-T+ 8*1G SFP/RJ45 COMBO ports downlink, 1* RJ45 console interface for switch basic management and setup •Layer 3 routing features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP •Port aggregation: Supports GE po

·Water-proof design with IP-65 Protection Level ·Integrated with splice cassette and cable management system ·Manage fiber in a reasonable fiber radius condition ·Easy to maintain and extend the capacity ·Fiber bend radius control more than 40mm ·Suitable for the fusion splice or mechanical spl

● 1*10/100Base-TX RJ45 PoE port, 1*100Base-FX SFP(/SC/ST/FC optional) fiber port ● Wide-Range Redundant Power Design DC 44~57V input, with polarity reverse/over-voltage protection ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard ● Powerful Dip switch function: 1.LFP; 2. Flow co

* 8× 10 Gbps SFP+ Ports enable high-bandwidth connectivity and non-blocking 160 Gbps switching capacity. *Compatible with existing Cat6A or better cabling *Support Jumbo frame *Complete LED indicator for operation status diagnosis *Support G.8032(ERPS), IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802

Fully modular design, full frontal operation, integrated fusion and wiring Large diameter coiling design keeps the bending radius of pigtails and patch cords above 40mm Integrated drawer type tray, which can be pulled out during operation and put back in when finished Suitable for ribbon and non-

●IEEE 802.3at, IEEE 802.3af PoE standard compliance ●Provides DC 48V power over RJ45 Ethernet cable to devices with Ethernet port ●Supports a maximum of 30 watts output power ●Support PD detection and PD classification ●Support super large video traffic ●Auto-negotiation support on RJ-45 port

•4*10/100Base-TX downlink, 1*100M fiber port(SFP, SC, ST) or RJ45 uplink •Hardware-based 10/100Mbps, half / full duplex , flow control and auto-negotiation •Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX Ethernet standards •Support auto MDI/MDI-X function &#

100% factory tested assemblies with traceable test data，Low environmental sensitivity Low insertion loss，High return loss，Stricter than industry standards Good exchange ability and good durability，Stable optical properties Standard connector，Various connector option: LC、SC、FC、ST etc. Standard:

It can be installed on any vertical flat surface or on a 4x2’’ box embedded in wall; Light and compact Easy handling, no special tools needed; The fiber optic reserve is inside the product; Allows accommodation of 40mm or 60mm fusion splice protectors; Capacity to store 20cm of optical cord wit

High-precision mechanical dimensions, high reliability and stability Ceramic sleeve, snap lock plug design More uniform insertion and extraction forces Not oxidized in environments with high humidity or salts Complete isolation to prevent accidental damage to the main control system High reliab

*Support 4k/1080p/720p/576p/576i/480p/480i resolution *120m long distance transmission *Low power consumption, low temperature and high safety *Aluminum housing *Mini size for easy carrying and transportation *Plug and play, no configuration required